Recipes use two teaspoon sizes: the US customary teaspoon of about 4.93 mL and the metric teaspoon of exactly 5 mL. The US teaspoon is one-third of a US tablespoon and one-sixth of a US fluid ounce. NIST lists it as 4.928922 mL in Special Publication 811, Appendix B.8; the converter uses 4.929 mL. The metric teaspoon is defined as 5 mL, and US nutrition labelling rules also use 5 mL for a teaspoon.
A metric teaspoon holds about 1.4% more than a US teaspoon. For one spoonful that is a small difference, such as 4.20 g against 4.26 g of granulated sugar, but it grows with the number of spoons.
Which Teaspoon Does My Recipe Use?
- US recipes that measure in cups, fluid ounces, and tablespoons use the US teaspoon.
- Metric recipes that measure in millilitres and grams use the 5 mL metric teaspoon.
- If you cannot tell, either choice is within about 1.4% for a single spoon. Choose the size printed on your measuring spoons.
What About the Imperial Teaspoon?
Older British recipes sometimes refer to an Imperial teaspoon. Published sizes for it vary. The converter offers a historical Imperial teaspoon of about 5.919 mL, a mathematically derived value rather than a directly sourced standard. It is not the modern 5 mL metric teaspoon, so check where your recipe comes from before relying on it.
A teaspoon measures volume, so its weight depends on the ingredient's density. The converter multiplies three numbers:
grams = teaspoons × teaspoon volume (mL) × density (g/mL)
teaspoons = grams ÷ (teaspoon volume (mL) × density (g/mL))
A level US teaspoon of fine table salt weighs about 6.00 g, while the same spoon of active dry yeast weighs about 3.10 g. The spoon is identical; the ingredients are not.
For dry ingredients, the density that matters is bulk density: the weight of the ingredient as it sits in the spoon, air gaps included. It depends on grain size and on how the spoon is filled, not only on the material itself. That is why fine table salt and coarse kosher salt need different values, even though both are salt.
Every value in the converter is for a level teaspoon, which is what a recipe means unless it says otherwise.
- Level: fill the spoon, then sweep a straight edge across the top.
- Heaped or rounded: there is no standard size for a heaped teaspoon, so the converter does not estimate one. Weigh the ingredient if a recipe asks for a heaped spoon and the amount matters.
- Packed: powders scooped straight from the bag are compressed and weigh more per spoon. Spoon them in, then level.
- Liquids: fill the spoon to the brim without letting it overflow.
- Damp or clumped ingredients fill the spoon differently from dry, loose ones.
The all-purpose flour option uses a reviewed 120 g-per-US-cup reference with an aerate, spoon, and level method. Scooping compacted flour can be substantially heavier, so use the recipe's stated weight where available.
Every result is an approximate cooking estimate. The references behind the values do not state a measured uncertainty, so the converter does not show a ± range, and you should not read the decimals as laboratory precision.
- Decimals setting: choosing 2, 3, or 4 decimals changes how the result is displayed, not how accurate it is.
- Very small amounts show as, for example, “< 0.01” rather than 0, so a small positive amount never looks like nothing.
- Metric values are derived: the references give weights for a teaspoon, and the metric value assumes the same bulk density in a 5 mL spoon.
- Spoon suggestions are rounded to the nearest ⅛ teaspoon, the smallest common measuring spoon.
- Small weights need a fine scale: ¼ teaspoon of fine table salt is about 1.50 g, so use a scale that reads in 0.1 g steps when an amount that small must be exact.
The searchable calculator covers 70 reviewed ingredient entries in US and metric teaspoons. Each entry names the form or preparation when it affects the factor.
A value is published only when its source and the exact ingredient form behind it have been reviewed. Many ingredients look alike but weigh differently by the spoon, so a value for one form is never used for another:
- All-purpose flour is modeled only for aerated, spooned-and-leveled flour; scooped or packed flour is not covered by that factor.
- Active dry and instant yeast have separate entries. Fresh cake yeast and sourdough starter are not represented by either dry-yeast value.
- Granulated, packed brown, and unsifted powdered sugar have separate entries because they pack differently.
- Fine table salt and the named Diamond Crystal and Morton kosher salts have separate entries. Generic flaky or rock salt is not assigned the table-salt value.
- Baking powder and baking soda have separate entries and are not treated as interchangeable.
- Fine garlic powder is separate from fresh minced garlic; granulated garlic remains unsupported.
Older pages for ingredients that have not been reviewed now show a short notice instead of a number. The site does not convert supplement or botanical product doses; use the serving size and scoop weight on the product label. More ingredients can be added once their sources have been reviewed.
Each value below lists what its source says, how the site uses it, and its limits. The recipe references do not specify a precise teaspoon volume. We adopt their masses as approximate level-US-teaspoon cooking references; values for other spoon sizes are derived assuming a constant bulk density. Water is handled differently: it uses a rounded liquid-water model rather than a recipe reference.
The ledger below records the five core values used by the homepage's unchanged editorial tables. Additional calculator entries carry structured form, preparation, source quantity, derivation, assumptions, and review-date fields in the shared dataset; ingredient-page source sections expose the same records where a dedicated page exists.
Water: about 4.93 g per US teaspoon
- Ingredient form
- Liquid water, temperature unspecified
- Source
- USGS Water Science School: Water density
- What the source says
- Water has a density of about 1 g/mL, and the exact value changes with temperature.
- How we use it
- The site keeps a rounded value of 4.93 g per US teaspoon (4.92892 mL); the metric value is derived from the same density. Metric teaspoon: about 5.00 g.
- Limits
- Not a measurement of a filled spoon. Temperature and dissolved substances are not modelled.
- Adopted
- 16 October 2026, as an approximate cooking estimate
Granulated white sugar: about 4.20 g per US teaspoon
- Ingredient form
- Granulated white (table) sugar, level spoon
- Source
- USDA Food Patterns Equivalents Database (FPED/MPED 2.0), definition of one equivalent of added sugars
- What the source says
- White granulated table sugar: 4.2 g per teaspoon (nutrition-equivalent definition, chapter 10).
- How we use it
- Adopted as 4.20 g per level US teaspoon. The source does not state the teaspoon volume, so the US assignment is an editorial assumption; metric values are derived assuming the same bulk density. Metric teaspoon: about 4.26 g.
- Limits
- A nutrition definition, not a spoon-filling experiment. Brown, raw and powdered sugar are not covered.
- Adopted
- 16 October 2026, as an approximate cooking estimate
Fine table salt: about 6.00 g per US teaspoon
- Ingredient form
- Fine-grain table salt, level spoon
- Source
- King Arthur Baking: Ingredient weight chart, Salt (table)
- What the source says
- Salt (table): 18 g per tablespoon.
- How we use it
- 6 g per teaspoon is our 3 teaspoons = 1 tablespoon derivation, adopted for a level US teaspoon; metric values are derived assuming the same bulk density. Metric teaspoon: about 6.09 g.
- Limits
- The chart does not state the spoon volume. Grain size and brand change the weight; other salts are not covered.
- Adopted
- 16 October 2026, as an approximate cooking estimate
Active dry yeast: about 3.10 g per US teaspoon
- Ingredient form
- Active dry yeast granules, level spoon
- Source
- Red Star Yeast: Italian Bread recipe (ingredient list)
- What the source says
- Active dry yeast: 2¼ teaspoons = 7 g (one packet).
- How we use it
- Adopted as 3.10 g per level US teaspoon (7 g ÷ 2.25 ≈ 3.11, kept at the existing rounded value); metric values are derived assuming the same bulk density. Metric teaspoon: about 3.14 g.
- Limits
- The recipe does not state the spoon volume. Instant and fresh yeast are different products and are not covered.
- Adopted
- 16 October 2026, as an approximate cooking estimate
Double-acting baking powder: about 4.00 g per US teaspoon
- Ingredient form
- Double-acting baking powder, level spoon
- Source
- King Arthur Baking: Ingredient weight chart, Baking powder (recipes specify double-acting)
- What the source says
- Baking powder: 4 g per teaspoon.
- How we use it
- Adopted as 4.00 g per level US teaspoon; metric values are derived assuming the same bulk density. Metric teaspoon: about 4.06 g.
- Limits
- The chart does not state the spoon volume. Some product labels give different values (for example 0.6 g per ⅛ teaspoon on one brand); this is not a universal or brand-specific factor. Baking soda is a different ingredient.
- Adopted
- 16 October 2026, as an approximate cooking estimate